Car enthusiasts, this 90-degree silicone reducer elbow is perfect for your turbo or intake system upgrades! The sizing is 1.75 inches reducing down to 1.5 inches with a generous 7-inch leg length (that's 178mm), and the wall thickness is about 0.2 inches (5mm). It's made from pure silicone with 4-ply reinforcement, which makes it super flexible yet durable enough to handle the pressure and heat from your engine. Speaking of temperature, this thing can handle from -60 all the way up to 300 degrees, with a burst pressure of 1 MPA - so it's not going to fail on you during hard driving. The 90-degree angle is perfect for those tight engine bay spaces where you need to make a clean turn without kinking. I've used mine for intercooler piping and turbo inlet connections, and it's held up great against oil exposure and heat cycling. The silicone material maintains its flexibility even in cold weather, unlike some rubber hoses that get stiff and brittle. Installation is straightforward - just make sure you use proper clamps and it'll seal up nicely. Whether you're building a custom turbo setup, upgrading your intercooler piping, or just replacing old cracked hoses, this reducer elbow gives you that professional look while providing reliable performance. The single hose it comes with is all you need for most applications, and the quality is definitely there for the price. Much better than trying to force the wrong size or angle to work in your engine bay!
Free 30-day returns 
Free 30-day returns
